Kyosho 32523MB - Radio Controlled Electric Powered Crawling car MINI-Z 4x4 Series Ready Set Suzuki Jimny Brisk Blue Metallic  [KY-32523MB]

In 2019 the world's hottest mini RC show, referred to as Kyosho MINI-Z, celebrated more than 2 full decades of unmatched performance and scale realism inside the hobby-grade RC category. The constant quest for performance and development has triggered the creation of a completely-new ‘MINI-Z 4x4’ design providing you with an all-new driving experience for RC fans of stripes, with superior general design, driving performance and top-notch injection-molded scale human body construction. A substantial function associated with MINI-Z 4x4 show will be the greater emphasis of human body information and quality of finish that also surpasses existing benchmarks set by the MINI-Z. The human body may be molded with thicker product to higher resist crash damage from procedure in rough area. Integrating equivalent ladder- design frame of genuine 4WD cars, the MINI-Z 4x4 boasts a 3-link rigid axle suspension system combining precisely what would generally speaking be two top links into an individual top A-arm to supply maximum suspension system motion. A specially produced high-torque steering servo enables this machine to throw its elbows around in to the difficult landscapes for exemplary performance into the most challenging rock-crawler conditions. The high-torque 130-size engine brings about the beast in to the MINI-Z 4x4, specifically targeted at run well in low to moderate price varies typical in crawling.

developed to balance exquisite style, scale information and superior driving performance, all of the MINI-Z 4x4 requirements is 8 x AAA alkaline batteries (sold separately). Enjoy driving under any conditions, from normal driving to rock crawling while appreciating the beautiful artistic appearance. The Kyosho Mini-Z 4x4 will be the only mini crawler that provides the total array of crawling performance in an inferior package.

TECHNICAL DATA

• Length 193mm
• Width 84mm
• Height 90.0mm
• Chassis Type MX-01
• Wheel Base 120mm
• Tread F/R:72.7mm
• Weight 242g (excl. battery)
• Motor/Engine 130 Class
• Gear Ratio 55.44:1/46.20:1/39.60:1, 39.60:1/34.65:1/34.65:1

• Front Tire Diameter Φ37.0mm
• Rear Tire Diameter Φ37.0mm
• Front Tire Width 12mm
• Rear Tire Width 12mm
• Battery 4 x AAA Alkaline
• Transmitter Syncro KT-531P
• Speed:Approx. 2.7km/h5.4km/h (Pinion gears 10T 20T)
• Running Time Approx. 60 minutes

KIT CONTENT

• Complete framework with integral electronic devices.
• Factory-painted human body filled up with numerous fine details
• KT-531P 2.4GHz transmitter
• Pinion gear set(10T12T14T16T18T20T)
• 3 kinds of pinion gear spacers

REQUIREMENT TO EXECUTE

• 4 x AAA batteries the transmitter
• 4 x AAA batteries for chassis (Alkaline or NiMH)