Kyosho 32530MB - Radio Controlled Electric Powered Crawling car MINI-Z 4x4 Series Ready Set Suzuki Jimny Brisk Blue Metallic  [KY-32530MB]

In 2019 the world's top mini RC series, called Kyosho MINI-Z, celebrated above two decades of unmatched performance and scale realism in hobby-grade RC category. The constant search for performance and development has triggered the creation of a completely-new ‘MINI-Z 4x4’ design providing you with an all-new driving experience for RC fans of most stripes, with superior overall design, driving performance and top-notch injection-molded scale body construction. A significant feature of MINI-Z 4x4 show could be the greater focus of human anatomy information and quality of finish that even surpasses current benchmarks set by the MINI-Z. The human body ordinarily molded with thicker product to higher resist crash damage from procedure in rough terrain. Incorporating comparable ladder- design framework of genuine 4WD vehicles, the MINI-Z 4x4 boasts a 3-link rigid axle suspension system combining exactly what would typically be two top links into one top A-arm to provide maximum suspension system system movement. A specially produced high-torque steering servo allows this device to put its elbows around in difficult landscapes for exceptional performance into the toughest rock-crawler conditions. The high-torque 130-size motor brings about the beast in MINI-Z 4x4, specifically tailored for run well inside low to medium speed ranges common in crawling.

Designed to balance exquisite style, scale information and superior driving performance, all of the MINI-Z 4x4 requirements is 8 x AAA alkaline batteries (provided separately). Enjoy driving under any conditions, from normal driving to rock crawling while appreciating the beautiful creative look. The Kyosho Mini-Z 4x4 could be the only mini crawler that provides the full selection of crawling performance in a smaller package.

TECHNICAL DATA

• Length 193mm
• Width 84mm
• Height 90.0mm
• Chassis Type MX-01
• Wheel Base 120mm
• Tread F/R:72.7mm
• Weight 242g (excl. battery)
• Motor/Engine 130 Class
• Gear Ratio 55.44:1/46.20:1/39.60:1
• 39.60:1/34.65:1/34.65:1
• Front Tire Diameter Φ37.0mm
• Rear Tire Diameter Φ37.0mm
• Front Tire Width 12mm
• Rear Tire Width 12mm
• Battery 4 x AAA Alkaline
• Transmitter Syncro KT-531P
• Speed:Approx. 2.7km/h5.4km/h (Pinion gears 10T 20T)
• Running Time Approx. 60 minutes

KIT CONTENT

• Complete framework with important electronics.
• Factory-painted human body detail by detail with many fine details
• KT-531P 2.4GHz transmitter
• Pinion gear set(10T12T14T16T18T20T)
• 3 types of pinion gear spacers

REQUIREMENT TO USE

• 4 x AAA batteries the transmitter
• 4 x AAA batteries for framework (Alkaline or NiMH)