To create its powerful performance to more drivers, the MINI-Z AWD is accessible in a Readyset. The MA-020 framework features VCS (variable camber suspension) within the front side that optimizes camber modification with suspension system swing and a specially developed circuit board. The framework design allows room for installing the optional gyro unit(Sold separately: No.MZW446). The gyro might be adjusted by switching a little volume on framework to mirror the total amount of steering modification in response to alterations in framework place, permitting novices right through to specialists to push with their complete potential. Entirely fitted away with accuracy ball bearings, the high drive effectiveness connected with MA-020 framework is complimented in the Readyset by the initial scale human anatomy and 2.4GHz Syncro KT-531P R/C system which will need no regularity musical company environment; all at an excellent value expense. Just set the batteries to take pleasure from the thrill of drift driving with all the current included couple of drift tires. The chassis works together nearly all ASC MINI-Z systems (additional components could be required for someone designs). The MINI-Z AWD guarantees a unique realm of dramatic race action for you yourself to experience and revel in.
※The separately offered Light-emitting Diode light unit set (No.MZW429R) isn't appropriate for the Toyota Celica GT-Four RC No.7 WRC 1993 Juha Kankkunen.
●MINI-Z AWD Readyset predicated on MA-020 framework.
●Special circuit board updated with optimized steering control system.
●Chassis features gyro sensitiveness modification function.
●Drift tires are installed as standard.
●Readyset calls for just batteries become ready to use it!
●Features 2.4GHz Syncro KT-531P transmitter that requires no setup of frequency bands.
●Factory finished human body includes display model quality finish.
●Features VCS (variable camber suspension system) that adjusts camber prior to suspension system system stroke.
●Coil springtime on front suspension can be simply changed without tools.
●wide selection of optional parts can be obtained become installed.
●Note) Optional ICS cannot be used. Additionally, this model is especially made for the KT-531P transmitter. It isn't compatible with the KT-18, KT-19, EX-5UR ASF, EX-6 or EX-6R transmitters. It truly is just appropriate for the special gyro item (offered separately: No.MZW446).
besides the driver’s name in 1993, Finland’s Juha Kankkunen brought Toyota and Japan its initial World Rally Championship (WRC) manufacturers name. The distinctive red, green and white Castrol colors and 6 fog lights created a formidable style combination.
Includes trendy design of Syncro KT-531P transmitter. Features steering / throttle trim plus dual cost modification of steering angle and control the blinking price of optional LEDs. Additionally, the transmitter has a workout Mode function which limits the rate associated with the vehicle for easy learning (the typical setting during the time of shipment is knowledge Mode).
Unique AWD Sports framework is dependant on the MA-02 chassis and features the RA45 device.
Features VCS front suspension system system that optimizes camber change in concert with suspension system stroke. Replacement of front suspension system system coil springs is straightforward without tools needed.
designed with strut-type straight back suspension system.
Full bearing specs consist of 14 ball bearings.
made with drift tires as standard.
Built with unique mount area and gyro modification volume the optional gyro item (offered independently: No.MZW446).
TECHNICAL DATA
- Length 169.0mm
- Width 73.0mm
- Height 49.0mm
- Wheelbase 90.0mm(M)
- Tread F : 61.5mm R : 59.0mm
- Chassis MA-020-N
- Front Wheel Offset Narrow +2.5mm
- Rear Wheel Offset Narrow +-0.0mm
- R/C System Syncro KT-531P
KIT CONTENT
- R / C device integral complete framework
- Painted and marked complete human anatomy
- Syncro KT-531P transmitter
- Mini pylon
- Pinion gear (15T, 17T, 19T, 21T)
- Spur gear (27T, 29T, 31T)
- free nut
- Wheel wrench
- Pinion reduction tool
REQUIREMENT TO RUN
- AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
- AAA-size alkaline batteries x 4 for transmitter
