Kyosho 33101 - 1/10 Scale Radio Controlled .15 Engine Powered 4WD QRC Series Readyset Nitro Tracker w/KT-231P+ [KY-33101]

Price:

AUD$0.00

Brand:

Kyosho

Model:

KY-33101

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
R/C Models - Off-Road - Trucks category

Write a review

Description

Using the rock-solid working safety of a big tire unit with wide tread, the almost square measurements of the Nitro Tracker produces amazing driving ability. Just take this 1/10 scale off road automobile anywhere you adore to take delight in the bigger level superior mechanics with this genuine engine-powered R/C automobile, like QRC (fast Reverse Clutch) that allows forward, neutral and reverse procedure. Another channel about the KT-231P+ transmitter operates a servo to maneuver the gears in QRC to change the drive gears between Forward-Neutral-Reverse, much like an actual automobile. The pre-installed effective KE15SP motor combines with the maintenance-friendly radio box and fuel pump that delivers gasoline effortlessly towards the carburetor from gas tank and engine-stop lever that properly brings the engine to a stop. With this particular Readyset, all you need is fuel, engine starting tools, and batteries to experience the effective practical performance with this awesome Nitro Tracker!.

●Readyset features pre-assembled 4WD framework with shaft-driven 4 bevel gear diffs on front part and backside and finished body set.
●3rd channel runs the QRC system (fast Reverse Clutch) to manage ahead, fundamental and reverse.
●2-speed transmission with adjustable modification timing makes maximum utilization of the KE15SP engine’s energy musical company.
●One-piece stiffener and radio field increases chassis rigidity and dustproof target for receiver and battery power.
●Includes waterproof KS4031-06W servos for steering, throttle and shift modification.
●Double wishbone suspension with adjustable camber and toe angle.
●Body post height is modified in 2mm increments..

Nitro Tracker features an aluminum flat pan framework installed with higher level components, for instance the double wishbone suspension system system with adjustable camber and toe, proven on other Kyosho models. QRC mechanism is set up behind the gas tank.

The simple design from the QRC system includes 5 gears, shaft and arm to use the clutch and will be offering control of ahead, neutral and reverse. Shift into reverse to prevent immoveable hurdles inside path.

Includes the 2.4GHz Syncro KT+231P+ transmitter that immediately manages regularity bands. A switch that runs another channel can be found above the hold to move between forward-neutral-reverse (switch place: highest=FWD, middle=Neutral, lowest=REV).

Includes KE15SP motor fitted with recoil starter for effortless launching and offers stable idling and simple procedure, also for newbies.

Fuel tank is equipped with pump that sends gas efficiently towards carburetor with 2-3 pushes associated with the pump key. Engine can be designed with counter lever that stops the engine properly.

Radio box is dustproof to reduce technical difficulty also within the harshest off road conditions including features maintenance-friendly front side & rear stiffeners. Pilot light programs when energy is ON so you won’t forget to change power OFF you need to positively used.

Oil shocks offer superior cushioning for exceptional running stability over rough areas. Dial modification of framework height permits establishing improvements to match any conditions.

Pickup vehicle body is pre-cut and printed in genuine United states muscle tissues design, matched by big diameter tires and tires.

Newly produced 1/10 scale block pattern φ120mm x 56mm tires create awesome performance on any area. Intimidating black colored colored tires add the finishing touch to the mighty unit.

TECHNICAL INFORMATION

Length 418.5mm
Width 321mm
Height 194mm
body weight 2,650g(approx.)
Wheelbase 298.5mm
Tread (F/R) 265mm
Tires (F/R interchangeable) φ120×56mm
Gear Ratio ahead (very first) 20.9:1 / (2nd) 13.9:1
Reverse (very first) 24.1:1 / (2nd) 16.0:1
motor KE15SP with recoil

KIT CONTENT

Completed framework with R/C radio installed
Transmitter (KT-231P +)
Binding stick
Hex wrench(1.5mm / 2mm / 2.5mm)
Cross wrench (large)
Instruction manual
2 nylon straps (for fixing air cleaner)

REQUIREMENT TO RUN

Glow fuel
8 x AA batteries for transmitters and receivers
Starting unit (fuel pump, plug heater)

Hot Brands

Kyosho 33101 - 1/10 Scale Radio Controlled .15 Engine Powered 4WD QRC Series Readyset Nitro Tracker w/KT-231P+ [KY-33101]