Futaba 6EXAP 6-Channel FM 35Mhz/ R136F/ 4xS3003  [6EXAP_c5]

Price:
AUD$233.58
Brand:
Futaba
Model:
6EXAP_c5
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
R/C Models - System - Transmitter - Flight Transmitters category
Write a review
FEATURES:
  • Aileron, Elevator and Rudder double cost switch - employ this change to ��flip�� between two aileron, elevator and rudder control throw settings. The tosses are setup you prefer, but most of the time, if the switch is ��up�� the throws are greater (��high rate��) when the switch is ��down�� the throws are less (��low rate��). This switch also flips between exponential rates (if used).
  • Flap control dial/Channel 6 - This dial operates the servo linked to channel 6 in the receiver in the case your model has flaps here is the control utilized to work them.Aileron/elevator control stick -Mounting point for optional neck strap.
  • Trim levers (all) -Used to move the neutral or center place of every servo as labeled inside diagram.
  • Asking jack - Port for charging you the transmitter batteries with all the current included battery charger.
  • On-off switch
  • DATA INPUT lever - frequently exchange the values associated with different functions exhibited regarding LCD screen.
  • Liquid-crystal display (LCD) - shows development modes and values joined.
  • MODE key - accustomed scroll through and show the ten or eleven(PCM) various functions.
  • CHOOSE key - accustomed display the values the present function.
  • Throttle-cut button - To use the throttle-cut function, paid off the throttle stick totally, then drive the throttle-cut key to totally shut the carburetor and shut for the engine.
  • Throttle/rudder control stick - runs the servos linked to channel 3 (throttle) and channel 4 (rudder) in the receiver.
  • Trainer switch - operates the trainer functions. To make use of as a trainer switch the transmitter must be linked to another transmitter via. a trainer cable (available individually).
  • Retractable landing gear switch/Channel 5 - change runs the servo linked to channel 5 into the receiver as soon as your model has retractable landing gear this is actually the control accustomed extend and retract the gear.
  • Antenna - Radiates signals towards the receiver. Don't ever travel a model without completely extending the antenna or you may create disturbance to other modelers and decrease functional sign collection of the transmitter. The antenna could be removed and changed with another in case its unintentionally broken.

Copyright © 2008-2024 rcjaz.com.au All rights reserved


Merry Deals for Every Hobbyist!
Redeem [ XM03 ] for 3% OFF—no minimum required!
Use [ XM05 ] for 5% OFF on orders over $100!
Go big with [ XM10 ] for 10% OFF on orders over $200!
This Christmas, gift your hobby the savings it deserves!