Futaba 6EXAP 6-Channel FM 40MHz/ R156F [6EXAP_c3]

Price:

AUD$176.49

Brand:

Futaba

Model:

6EXAP_c3

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
R/C Models - System - Transmitter - Flight Transmitters category

Write a review

Description

QUALITIES:

Aileron, Elevator and Rudder dual rate switch - utilize this modification to flip between two aileron, elevator and rudder control throw settings. The tosses might be setup nonetheless choose, but generally, once the switch is up the throws are greater (higher level) so when the switch is down the throws are less (low cost). This switch furthermore flips between exponential costs (if utilized).
Flap control dial/Channel 6 - This dial runs the servo linked to channel 6 in the receiver if your model has flaps here is the control useful to use them.Aileron/elevator control stick -Mounting point for optional throat strap.
Trim levers (all) -Used to go the neutral or center place of each and every servo as labeled within the diagram.
Charging you jack - Port for recharging the transmitter batteries along with the included battery pack charger.
On-off switch
INFORMATION INPUT lever - always replace the values of various functions exhibited about the LCD screen.
Liquid-crystal display (LCD) - shows development modes and values entered.
MODE key - accustomed scroll through and display the ten or eleven(PCM) different functions.
PICK key - accustomed show the values for the current function.
Throttle-cut key - to utilize the throttle-cut function, lower the throttle stick entirely, then drive the throttle-cut key to completely close the carburetor and shut of engine.
Throttle/rudder control stick - runs the servos attached to channel 3 (throttle) and channel 4 (rudder) in to the receiver.
Trainer switch - operates the trainer functions. To utilize as a trainer switch the transmitter must certanly be connected to another transmitter via. a trainer cord (available separately).
Retractable landing gear switch/Channel 5 - change operates the servo connected to channel 5 in receiver in case your model has retractable landing gear this is actually the control frequently expand and retract the gear.
Antenna - Radiates signals towards receiver. Never ever travel a model without totally extending the antenna or you may produce disturbance with other modelers and decrease operational indication collection of the transmitter. The antenna could be removed and changed with another whenever it really is accidentally broken.

INCLUDES:
Futaba 6-Channel 6EXAP transmitter
Futaba R156F Receiver
change Harness
Handbook

SPECS:
Transmitter
T6EXAP Transmitter with programmable blending and 6-model memory.
Transmitting on 40 / 72 MHz musical company.
Operating-system: 2-stick, 6-channel system
Modulation: FM(PPM) and PCM
power: 9.6V NT8S600B Ni-Cd battery pack or 12V alkaline battery
Current drain: 250mA

Hot Brands

Futaba 6EXAP 6-Channel FM 40MHz/ R156F [6EXAP_c3]