Futaba 6EXAP 6-Channel FM 72Mhz/ R136F/ 4xS3003  [6EXAP_c6]

Price:
AUD$233.58
Brand:
Futaba
Model:
6EXAP_c6
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
R/C Models - System - Transmitter - Flight Transmitters category
Write a review
QUALITIES:
  • Aileron, Elevator and Rudder twin price switch - utilize this change to ��flip�� between two aileron, elevator and rudder control throw settings. The tosses are generate nonetheless select, but in most cases, whenever switch is ��up�� the throws are greater (��high rate��) so when the switch is ��down�� the throws are less (��low rate��). This switch also flips between exponential prices (if used).
  • Flap control dial/Channel 6 - This dial operates the servo connected to channel 6 within the receiver in case the model has flaps here is the control useful to make use of them.Aileron/elevator control stick -Mounting point for optional throat band.
  • Trim levers (all) -Used to shift the basic or center place of every servo as labeled in diagram.
  • Recharging jack - Port for asking the transmitter batteries utilizing the included battery charger.
  • On-off switch
  • INFORMATION INPUT lever - regularly change the values linked to the various functions exhibited in the LCD display.
  • Liquid-crystal display (LCD) - Displays development modes and values joined.
  • MODE key - regularly scroll through and show the ten or eleven(PCM) various functions.
  • PICK key - always show the values the present function.
  • Throttle-cut key - to utilize the throttle-cut function, paid down the throttle stick completely, then Push the throttle-cut change to fully shut the carburetor and shut associated with engine.
  • Throttle/rudder control stick - operates the servos attached to channel 3 (throttle) and channel 4 (rudder) inside receiver.
  • Trainer switch - runs the trainer functions. To operate as a trainer switch the transmitter ought to be connected to another transmitter via. a trainer cable (available separately).
  • Retractable landing gear switch/Channel 5 - change runs the servo linked to channel 5 to the receiver in the event your model has retractable landing gear this is actually the control used to expand and retract the apparatus.
  • Antenna - Radiates signals towards receiver. Never ever travel a model without totally extending the antenna or maybe you may possibly produce disturbance with other modelers and decrease functional sign array of the transmitter. The antenna might be eliminated and replaced with another whenever it is accidentally broken.

Copyright © 2008-2024 rcjaz.com.au All rights reserved


Merry Deals for Every Hobbyist!
Redeem [ XM03 ] for 3% OFF—no minimum required!
Use [ XM05 ] for 5% OFF on orders over $100!
Go big with [ XM10 ] for 10% OFF on orders over $200!
This Christmas, gift your hobby the savings it deserves!