Futaba 6EXAP 6-Channel PCM 40Mhz/ R136HP/ 4xS3003 [6EXAP_c8]

Price:

AUD$302.38

Brand:

Futaba

Model:

6EXAP_c8

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
R/C Models - System - Transmitter - Flight Transmitters category

Write a review

Description

QUALITIES:

Aileron, Elevator and Rudder twin price switch - use this change to ��flip�� between two aileron, elevator and rudder control throw settings. The tosses is initiated you choose, but broadly speaking, when the switch is ��up�� the throws are greater (��high rate��) and when the switch is ��down�� the throws are less (��low rate��). This switch also flips between exponential prices (if used).
Flap control dial/Channel 6 - This dial operates the servo linked to channel 6 in to the receiver in case the model has flaps this is actually the control utilized to work them.Aileron/elevator control stick -Mounting point for optional neck strap.
Trim levers (all) -Used to move the essential or center host to every servo as labeled in the diagram.
Charging you jack - Port for charging you the transmitter batteries using the included battery pack charger.
On-off switch
INFORMATION INPUT lever - frequently exchange the values connected with different functions shown regarding LCD screen.
Liquid-crystal display (LCD) - Displays programming modes and values joined.
MODE key - accustomed scroll through and show the ten or eleven(PCM) different functions.
PICK key - regularly show the values the existing function.
Throttle-cut switch - to utilize the throttle-cut function, lower the throttle stick completely, then Push the throttle-cut change to completely shut the carburetor and shut of motor.
Throttle/rudder control stick - runs the servos attached to channel 3 (throttle) and channel 4 (rudder) inside receiver.
Trainer switch - Operates the trainer functions. To get results as a trainer switch the transmitter must be attached to another transmitter via. a trainer cable (available separately).
Retractable landing gear switch/Channel 5 - Switch operates the servo attached with channel 5 inside receiver in the event that model has retractable landing gear here is the control accustomed expand and retract the apparatus.
Antenna - Radiates signals to your receiver. Never fly a model without fully expanding the antenna or you could create disturbance along with other modelers and decrease practical sign selection of the transmitter. The antenna could be eliminated and changed with another in case it is actually inadvertently broken.

Hot Brands

Futaba 6EXAP 6-Channel PCM 40Mhz/ R136HP/ 4xS3003 [6EXAP_c8]