Futaba 6EXAP 6-Channel PCM 40MHz/ R146IP [6EXAP_c4]

Price:

AUD$203.18

Brand:

Futaba

Model:

6EXAP_c4

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
R/C Models - System - Transmitter - Flight Transmitters category

Write a review

Description

QUALITIES:

Aileron, Elevator and Rudder twin price switch - make use of this modification to flip between two aileron, elevator and rudder control throw settings. The throws could be create nevertheless you select, but generally speaking, if the switch is up the throws are greater (higher level) and when the switch is down the throws are less (low cost). This switch in addition flips between exponential prices (if used).
Flap control dial/Channel 6 - This dial runs the servo attached to channel 6 within the receiver if the model has flaps this is the control useful to work them.Aileron/elevator control stick -Mounting point for optional throat band.
Trim levers (all) -Used to move the neutral or center position of every servo as labeled into the diagram.
Recharging jack - Port for recharging the transmitter batteries due to the included battery pack charger.
On-off switch
DATA INPUT lever - regularly change the values concerning the different functions exhibited regarding the LCD display screen.
Liquid-crystal display screen (LCD) - Displays development modes and values entered.
MODE key - regularly scroll through and show the ten or eleven(PCM) different functions.
PICK key - constantly reveal the values the current function.
Throttle-cut switch - To use the throttle-cut function, reduced the throttle stick entirely, then drive the throttle-cut key to fully close the carburetor and shut linked to the motor.
Throttle/rudder control stick - operates the servos attached with channel 3 (throttle) and channel 4 (rudder) inside receiver.
Trainer switch - operates the trainer functions. To use as a trainer switch the transmitter has to be attached to another transmitter via. a trainer cord (available individually).
Retractable landing gear switch/Channel 5 - modification runs the servo linked to channel 5 in receiver should your model has retractable landing gear here is the control frequently extend and retract the apparatus.
Antenna - Radiates signals on receiver. Never travel a model without completely expanding the antenna or simply you might produce interference to a lot of other modelers and decrease operational indication array of the transmitter. The antenna might removed and changed with another in the case it is accidentally broken.

INCLUDES:
Futaba 6-Channel 6EXAP transmitter
Futaba R146IP Receiver
Change Harness
Manual

SPECS:
Transmitter
T6EXAP Transmitter with programmable blending and 6-model memory.
Transmitting on 40 / 72 MHz musical organization.
Os: 2-stick, 6-channel system
Modulation: FM(PPM) and PCM
power: 9.6V NT8S600B Ni-Cd battery or 12V alkaline battery
present drain: 250mA

Hot Brands

Futaba 6EXAP 6-Channel PCM 40MHz/ R146IP [6EXAP_c4]