Futaba 6EXAP 6-Channel PCM 72Mhz/ R136HP/ 4xS3003 [6EXAP_c9]

Price:

AUD$290.06

Brand:

Futaba

Model:

6EXAP_c9

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
R/C Models - System - Transmitter - Flight Transmitters category

Write a review

Description

QUALITIES:

Aileron, Elevator and Rudder twin cost switch - take advantage of this change to ��flip�� between two aileron, elevator and rudder control throw settings. The tosses is setup you decide on, but generally speaking, whenever switch is ��up�� the throws are greater (��high rate��) then when the switch is ��down�� the throws are less (��low rate��). This switch furthermore flips between exponential rates (if used).
Flap control dial/Channel 6 - This dial operates the servo attached with channel 6 inside receiver whenever the model has flaps here is the control used to work them.Aileron/elevator control stick -Mounting point for optional neck band.
Trim levers (all) -Used to move the neutral or center place of each servo as labeled in to the diagram.
Charging you jack - Port for asking the transmitter batteries utilising the included battery pack charger.
On-off switch
DATA INPUT lever - Used to change the values of various functions shown in LCD display.
Liquid-crystal display screen (LCD) - Displays programming modes and values joined.
MODE key - always scroll through and show the ten or eleven(PCM) various functions.
SELECT key - frequently reveal the values for the present function.
Throttle-cut key - to utilize the throttle-cut function, lower the throttle stick completely, then drive the throttle-cut key to completely shut the carburetor and shut of the engine.
Throttle/rudder control stick - Operates the servos linked to channel 3 (throttle) and channel 4 (rudder) within the receiver.
Trainer switch - operates the trainer functions. To use as a trainer switch the transmitter must be attached with another transmitter via. a trainer cord (available individually).
Retractable landing gear switch/Channel 5 - Switch runs the servo linked to channel 5 in receiver if your model has retractable landing gear this is actually the control constantly expand and retract the gear.
Antenna - Radiates signals toward receiver. Don't ever travel a model without totally expanding the antenna or you may produce disturbance to numerous other modelers and decrease operational sign range of the transmitter. The antenna might removed and changed with another in the event its unintentionally broken.

Hot Brands

Futaba 6EXAP 6-Channel PCM 72Mhz/ R136HP/ 4xS3003 [6EXAP_c9]