Futaba 6EXAP 6-Channel PCM 72Mhz/ R146IP  [6EXAP_c11]

Price:
AUD$203.18
Brand:
Futaba
Model:
6EXAP_c11
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
R/C Models - System - Transmitter - Flight Transmitters category
Write a review
FEATURES:
  • Aileron, Elevator and Rudder twin cost switch - employ this change to ��flip�� between two aileron, elevator and rudder control throw settings. The tosses are generate nonetheless prefer, but generally speaking, as soon as the switch is ��up�� the throws are greater (��high rate��) when the switch is ��down�� the throws are less (��low rate��). This switch also flips between exponential rates (if utilized).
  • Flap control dial/Channel 6 - This dial runs the servo attached with channel 6 in to the receiver in the event the model has flaps this is actually the control employed to operate them.Aileron/elevator control stick -Mounting point for optional neck band.
  • Trim levers (all) -Used to move the basic or center place of every servo as labeled into the diagram.
  • Charging you jack - Port for billing you the transmitter batteries with all the current included battery pack charger.
  • On-off switch
  • DATA INPUT lever - constantly change the values concerning the various functions presented about the LCD display screen.
  • Liquid-crystal display (LCD) - shows development modes and values joined.
  • MODE key - frequently scroll through and show the ten or eleven(PCM) various functions.
  • PICK key - accustomed show the values the present function.
  • Throttle-cut switch - to utilize the throttle-cut function, paid off the throttle stick entirely, then Push the throttle-cut key to fully shut the carburetor and shut regarding the engine.
  • Throttle/rudder control stick - runs the servos mounted on channel 3 (throttle) and channel 4 (rudder) in receiver.
  • Trainer switch - operates the trainer functions. To use as a trainer switch the transmitter should be attached to another transmitter via. a trainer cable (available individually).
  • Retractable landing gear switch/Channel 5 - Switch runs the servo attached to channel 5 into the receiver if your model has retractable landing gear here is the control accustomed expand and retract kit.
  • Antenna - Radiates signals towards receiver. Never ever travel a model without fully expanding the antenna or perhaps you may possibly produce disruption to many other modelers and decrease functional sign selection of the transmitter. The antenna could possibly be eradicated and changed with another in the event it's inadvertently broken.

Copyright © 2008-2024 rcjaz.com.au All rights reserved


Merry Deals for Every Hobbyist!
Redeem [ XM03 ] for 3% OFF—no minimum required!
Use [ XM05 ] for 5% OFF on orders over $100!
Go big with [ XM10 ] for 10% OFF on orders over $200!
This Christmas, gift your hobby the savings it deserves!