Kyosho 30575MY - 1/27 RC EP MINI-Z AWD MA-010D with ASF 2.4GHz System +D Series - NISSAN FAIRLADY Z (Z33) NISMO S-tune equipped with GT Rear Wing Yellow Metallic - Body/Chassis Set  [30575MY]

Racy tuning car reproduction with aggressive aero parts!
Take pleasure in the breathtaking thrills of AWD performance with unique drift tires included!

Shaft driven AWD with four-wheel separate suspension system in Kyosho's micro-sized Mini-Z AWD understands effective performance with a classy brand new design. The aggressive design of the front spoiler combines with a mock carbon bonnet (decal finish), part actions, and back under skirt and back spoiler to replicate the daunting as a type of genuine tricked-out tuning device. The black colored colored RS Watanabe tires add the completing touch while the included drift tires created from unique POM (polyacetal) product create the drift driving faculties for the initial AWD device. This kit also contains helpful tips that teaches you how exactly to master drift driving strategy. Using the one-piece 2.4GHz RA-19 ESC, receiver product and servo, finding an open regularity isn't a lot longer a concern (transmitter offered independently) to focus on enjoying the fun of rushing. The vehicle body is finished with Kyosho's Fine Hand Polish for a hardened vivid surface that will help you enjoy the stunning workmanship with this model because it slides throughout the track, or sits proudly on your desk.

• Optimal balance is recognized through midship engine mount and shaft drive AWD + 4-wheel independent suspension system.
• Fine Hand Polish finish creates a deep gloss and a hardened area.
• Universal swing shafts on all tires deliver a higher effectiveness and stable driving faculties.
• Uniquely shaped gear teeth concerning the crown and pinion gears in precision 3-bevel gear differentials drive all four tires.
• Tie rods could be eliminated with one touch. Front and back toe views is modified with choices.
• Includes unique tires for drift driving.
• Carbon bonnet reproduction provides the practical appearance of a genuine road tuning car.

• Tuning vehicle needs include: front part spoiler; part actions; back under gown; back spoiler, RS Watanabe wheels and carbon bonnet (decal finish).
• Includes POM tires for drift driving as well as standard tires.
• Loaded with retractable headlights that may be fitted with LED's (offered individually). Can be set closed with included components.
• Pre-installed ASF 2.4GHz system immediately discovers available regularity bands.
• Frequency crystals aren't required and up to 40 vehicles are run at exactly the same time.
• One transmitter could possibly be registered to numerous framework that use 2.4Ghz systems.
• Ultra quick signal processing rate leads to nearly instantaneous control reaction.
• FET speed control amp features nearly dual the capacity of past model to deliver powerful operating performance. (when compared with 27MHz model)
• designed with I.C.S. terminals that may connect to a pc for accuracy environment modification.
• Made with Ver. 2 specification RA-19 that permits reverse timing modification along with the I.C.S function.
• Features LED indicator for energy status.
• Includes 4 pinions and 3 spur gears for a range of gear ratio settings.
• Includes collars used for modification of framework height.
• Front is sold with bump end to prevent contact between tire and human body free of charge suspension system swing.
• High precision finish to 1/100mm.
• Differential devices can be create or eliminated with 4 screws on front and 6 on rear.
• Experience the drift driving excitement of AWD devices.
• Only 5g thicker than the MR-03 nevertheless with AWD and 4-wheel suspension system system.
• Chassis design understands a tiny width of simply 65mm and it's also primarily worthy of systems the 01 and 015.
• Built with 4 accuracy ball bearings for high effectiveness performance.
• Transformation towards the MINI-Z Racer M or L size wheelbase allows your existing MINI-Z human body styles become fitted. (maybe not appropriate someone designs)
• Number of optional components can be obtained.
• Precision manufacturing technology results in an efficient differential function.
• One-piece ASF 2.4GHz RA-19 Ver.2 ESC-receiver unit provides interference-free control through its automatic management of regularity bands.