Kyosho 30973T1 - 1/7 EP 2WD Buggy SCORPION XXL VE readyset Color Type 1 (White)  [30973T1]

Menacing appearance and satisfaction to match!
Appears BAD, runs good! An easy task to run, tough in the competition!

The brand new Kyosho Scorpion XXL combines the effective off road performance craved by off road racers with easy drivability of a XXL scale down road device. The sluggish, typically sluggish response of present big scale models make sure it is harder discover suitable areas to race them. Kyosho creates another and exciting truth for major fans, delivering a machine that's somewhat smaller sized, but features the explosive performance and lightning-quick responses of a finely-tuned racing machine. New framework design! The 3mm primary framework features a molded "perimeter" frame that results in rock-solid rigidity. As well as supplying superior suspension system travel, the reduced shock mounting place associated with the front "gull" hands keeps the shocks only easy for optimum cornering rates and exceptional stability through the entire roughest areas. This will be complimented by today's straight back suspension system system typical of 1/10-scale automobiles, strengthened to make a robust suspension system system with this big device. Leading suspension system system and steering geometry end up in superior large-scale control like no time prior to.

• The receiver package is in fact the proper size the compact KR200 receiver. The mounting place can be as far feasible through the electronic devices to scale back possible interference.
• Features hex kind screws for safe installation and razor-sharp appearance too.
• The molded front part and back surprise towers function ultra rigid construction for accuracy performance, while permitting adequate flex to maximise durability.
• Molded roll club and roof are setup with dummy fog lights. Roll club is pre-installed concerning the Readyset.
• Includes a wing mount that permits installing a corner wing through Inferno MP9 (optional). Little modification to wing is required.

ReadySet articles

• Factory assembled chassis with 2-channel, 1-servo, 1-ESC R/C device
• Syncro KT-201 transmitter
• Pre-painted body
• Pre-installed Team Orion VORTEX 7 brushless engine
• Pre-installed Team Orion VORTEX VE-XXL ESC
• Cross wrench

Necessary for procedure

• Battery for chassis/ 7.2-14.4V Li-Po battery with super plug connector
• Battery charger
• 4 x AA-size alkaline batteries for transmitter

Chassis Technical information

• Length 630mm
• Width 402mm
• Height 244mm
• Wheelbase 452mm
• Tread (F/R) 353 / 331mm
• Tire(F/R) F130�43mm / F140�71mm
• Gear Ratio 16.0:1
• Body fat 4000g(with individual body)
• Motor Orion Vortex 7 brushless