Serpent 190mm 1/10 scale ready-to-Race Touringcar, based on the effective 411 race-cars. Factory assembled, with race-wheel-tyres, pre-cut and prepainted human body, Dragon-RC electronic speedo, Dragon-RC brushless 9T motor, Dragon-RC DTS-1 2.4ghZ transmitter. The entire package to begin rushing in to the electric touringcar category or just competition anywhere for enjoyable.
Specs:
- Course: 1/10th scale 190mm Electric
- Function: 190mm touring vehicle
- Chassis: 2.5mm glass fiber, CNC machined
- Suspension: Front C-Hub suspension system system system
- Rear axle: right back gear- differential
- Front axle: Front nylon spool
- Drive system: 4wd through 2 kevlar strengthened timing belts
- Shock absorbers: RCM surprise absorbers
- Wheel base: 254mm +/- 4mm
- Track-width front part: 190mm /- 6mm
- Track-width backside: 190mm /- 6mm
- Adjustability: Camber, Caster, Up-Down-stops, Toe-in, width & Roll centres
- Guidelines: complete color instruction manual, reference guide
- Included: engine, rate Controller, tires, human anatomy, radio gear.
- Not included: Battery Lipo and 4 x AA battery for radio, charger
Features:
Chassis
Supernarrow, symmetrical , durable black colored colored glass-fibre chassisplate with optimised flex design, countersunk holes, primary component holes all perfectly in center, pockets for geardiff, spool and spur.
Topdeck
Durable black colored glass-fibre topdeck with optimised flex design.
Battery-mount brackets and Lipo-holders
easy to use nylon batter tape owner, which let the battery tape to run over as opposed to in framework. The holders are reversed for almost any other battery power place. The Lipoholders will firmly keep consitently the Lipo in place, also at difficult effect.
Servo-mount
The servo is mounteded on another meal, so flex is less affected.
Shocktower front part
Ebony glass fibre shocktower with 3 top shock mounting holes available . Holes for a supplementary main bodypost already are made additionally.
Front side bracket
Machined aluminium front side brackets, with gear stress adjusting through excenters. Suspension brackets in durable nylon.
Front suspension system system
Durable reduced front side wishbones attached to the internal brackets with strong metal pivot pins. An anti-roll club system could possibly be set up as choice.
C-hub / steeringblock
The c-hub kind front side system creates an excellent accurate steering feeling with great feedback, and strong wheelguidance without chatter.
Shocktower right back
Black cup dietary fiber shocktower with 4 upper shock mounting holes available . The rear bodyposts are set up towards the top of straight back shocktower.
Backside bracket
Machined aluminium straight back brackets, with gear stress adjusting through excenters. Suspension brackets in durable nylon with 3.0 RR RR and split type 0.0 obstructs RR FR
Back suspension
Durable paid down right back wishbones for this interior brackets with strong metal pivot pins. An anti-roll club system may be set up as choice.
Right back upright
Strong rear uprights with 2 top jobs, for perfect guidance of rear wheels.
Motormount
Machined aluminium motormount / center shaft help.
Center shaft
Ballraced center shaft with 2 small pully?s and the primary Serpent spur gear.
Bumper
Big foam front bumper captured by a top and paid down nylon bumper
Bodymount
Front bodymount is set up through front bumper, and the back people are seated regarding the shocktower. Multiple bodyposiiton holes available.
Gear-diff
Extremely lightweight ballraced geardifferential in to the rear, with steel gears and axles for durablity. Supersmooth.
Spool
Front nylon lightweight spool with screw mounted front gearpulley
Transmission / belts / pulleys
Smooth low friction fine pitch belts alongside optimised nylon pulleys
Driveshaft / wheelhex / wheelaxle
Steel driveshafts, coupled with ballraced wheelaxles and nylon wheel-hex adaptors
Steering system
Steering system with optimised ackermann for basic steering-feeling.
Shockabsorbers
Latest kind RCM competition shockabsorbers with membranes and checked colorcoded competition springs.
Ball-bearings
totally ballraced with oiled higher rate sealed stainless bearings.
Tyres-wheels
The 411-RTR has Dragon-RC synthetic rushing tyres with foam inlays on Serpent TC wheels for super-grip.
Body
The EFRA approved 1/10 scale Serpent TC body Lex-is fitted, fully pre-cut and prepainted in an excellent paintjob with 4 colors.
Electronics
The 411 RTR comes with Dragon-RC electronic 35A speedcontroller, Dragon-RC non sensored brushless motor 9T 3000 kv, Dragon-RC DTS-1 electronic 2.4 gHz pistol-typetransmitter with big LCD display, Dragon-RC electronic receiver in 2.4 gHz and Dragon-Rc electronic servo 0.13s - 6kg.
Optionals / updating
The Serpent 411 Sport is based on the most truly effective end competition form of the 411. All elements from 411 race-version and in addition all optionals, additionally fit the 411 Sport. This enables someone to improve your 411 Sport to a higher degree battle spec step by action, with all the current components you choose. The 411 Sport parts manual shows those parts, and you can see them inside optionals part of the 411 Sport and.
