Tamiya welcomes a whole new variation towards the TB Evo. show - the quickest shaft-driven framework created by Tamiya - which were just available in the year 2000. With an updated chassis design through TB Evo. 7, its suspension system system features popular A-shaped suspension fingers that is useful for the Tamiya TA08 PRO Chassis kit. Furthermore, the motor might be present two places. Usually do not miss this chance to fully grasp this framework featuring efficient drive and superior controllability!
• 1/10 scale R/C shaft driven 4WD chassis put up kit.
• select from two kinds of motor design - front mid engine layout or straight back mid motor design.
• Lower deck and vertical upper decks are crafted in carbon fiber, and also make certain pitch rigidity.
• Aluminum bulkhead and damper stay are one-piece component.
• 7mm suspension system balls and king-pins are combined for smooth movement. (Item 22016)
• leading A-shaped supply suspension system system employs Super brief Big Bore dampers and utilizes 5.8mm balls to obtain connected top and bottom parts for superior responsiveness.
• the trunk suspension system employs connect rods for effortless modification of toe angle on upright side.
• The steering linkage is affixed straight to bulkhead to limit any effect upon chassis roll.
• Features efficient, fuss-free modification of motor backlash via two screws on framework upside.
• Highly-efficient shaft-driven 4WD is accomplished with a front direct coupling and double cardan drive shafts, plus a rear gear differential item and aluminum drive shafts.
• utilizes urethane front side bumper (from Item 58693: TA08 PRO framework) for great aerodynamics.
• Carbon dietary fiber, drifting R/C gear deck linked by screws eliminates utilization of double-sided tape for upkeep.
• is sold with a carrying case.
• needed to finish: 2-channel radio, steering servo, ESC, engine, 7.2-7.4volt battery, 1/10 scale touring automobile human anatomy, and tires.
New Parts
Carbon soluble fbre elements:
Lower deck / upper decks x4 (two each for front mid motor layout or rear mid engine layout correspondingly) R/C equipment deck
Aluminum components:
One-piece lower bulkheads / front top bulkhead / backside top bulkhead / engine mount /
propeller shafts (two for front mid motor design and another for rear mid motor design) / servo mount /
center stiffener / master pin balls (Item 22016) / steering bridge / battery mount & mount spacer
Polycarbonate component:
Differential covers
