Tamiya 58294 - 1/10 R/C High Performance F201 w/Original  [58294]

This is the 1/10 Scale Electric Powered, Radio Controlled, 4 Wheel Drive
Tamiya F201 Chassis On-Road automobile Kit.

QUALITIES:

Chassis: Monocoque synthetic F201 kind.
Drive: Four wheel shaft drive.
Motor: RS 540 sport tuned.
Ball Bearings: Complete set included.
Shocks: Oil-filled synthetic bodied.
Gearbox: Closed front side and rear.
Differentials: Planetary gear.
Transmission: Single-speed.
Tires: 1.18" (30mm) tread width, 2.4" (62mm) exterior diameter, 1.5"
(38mm) inner diameter plastic treaded.
Wheels: 1" (25.5mm) width, 1.6" (40mm) internal diameter grey plastic
spoke.
Speed Control: involved, use electronic type for most readily useful performance.
Bumpers: Front and rear black plastic.
Suspension: Adjustable.
Camber Tie Rods: Adjustable. Camber is the angle where the tires
sit vertically.
Steering Tie Rods: Adjustable. Caster/Toe-in relates to the angle
that the tires point inward as seen from above.
Steering: Bell-crank type.
Servo Saver: Included.
Body: One clear and something Lexan Carbon Fiber Pattern human anatomy with black
plastic rear spoiler.

INCLUDES: One Tamiya F201 Chassis with oil-filled shocks, 540 stock motor,
one clear and another polycarbonate patterned human body, treaded rubber
tires, foam inserts, plastic mesh tires, instructions, antenna
tube, decal sheet, hardware, one driver helmet for every body,
20 enamel steel pinion gear, 55 enamel synthetic spur gear, surprise oil.

NEEDS: broadcast: 2-Channel with one servo.
Radio Batteries: (8) AA size
Speed Control: Electronic.
Battery: 6-cell flat with standard connector, 7 mobile will not fit.
Charger: AC/DC timed or top for 6-cell battery
Paint: Spray or brush-on for polycarbonate plastic bodies.
Misc. Products: Building and track gear

SPECS: VEHICLE-
Length: 16.7" (425mm)
Width: 7.7" (196mm)
Height: 3.3" (100mm)
fat: 3.3 lbs (1480g)(approx.)
Wheelbase: 11.2" (280mm)
Gear Ratio: 2.75:1
Tires- Front and back: 1.18" (30mm) tread width, 2.4" (62mm) outer
diameter, 1.5 (38mm) inner diameter rubber treaded.
BODY-
Length: 14.5" (368mm)
Width: 6.25" (159mm) at cockpit (widest point)
1.25" (32mm) at from tires (thinnest point)
Height: 3.34" (85mm)

FEEDBACK: For Replacement Ball Bearings usage:
Qty. Size Location Bearing Set Qty.
(4) 10 x 15mm Ball Diffs
(4) 8 x 5mm Ball Diffs
(2) 8 x 12mm Gearbox
(1) 5 x 11mm Gearbox
(1) 5 x 10mm Gearbox
(2) 10 x 15mm Rear Uprights
(2) 8 x 5mm Steering Arms
(2) 10 x 15mm Front Uprights
(2) 5 x 11mm Drive Shaft
(1) 5 x 10mm Drive Shaft
(1) 5 x 8mm Drive Shaft
(4) 6 x 12mm Wheels