HOBBYWING XRotor Nano 20A 4in1 BLHeli-S DShot600 - 30901068  [HW-30901068]

HOBBYWING XRotor Nano 20A 4in1 BLHeli-S DShot600 - 30901068
Price:
AUD$0.00
Brand:
Hobbywing
Model:
HW-30901068
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
R/C Models - System - Drone System category
Write a review
alt="HOBBYWING XRotor Nano 20A 4in1 BLHeli-S DShot600 - 30901068" title="HOBBYWING XRotor Nano 20A 4in1 BLHeli-S DShot600 - 30901068"
alt="HOBBYWING XRotor Nano 20A 4in1 BLHeli-S DShot600 - 30901068" title="HOBBYWING XRotor Nano 20A 4in1 BLHeli-S DShot600 - 30901068"
alt="HOBBYWING XRotor Nano 20A 4in1 BLHeli-S DShot600 - 30901068" title="HOBBYWING XRotor Nano 20A 4in1 BLHeli-S DShot600 - 30901068"

Extremely built-in & Compact

The XRotor Nano 20A 4in1 BLHeli-S DShot600 not only includes 4
superior 20A ESCs, and a volt monitoring slot allows for FC to
monitor the voltage immediately (on condition your FC supports this function).
Because of the exceptionally tiny size, the installation and wiring could be very easy
and simple whenever combining it due to the Hobbywing XRotor Nano Flight Controller.
It’s an ESC specially designed for super mini-sized interior FPV(s).


Top-notch Components

The utilization of EMF8BB21F16G MCUs with the operating regularity all the way to
48MHz, introduced high-quality MOSFETs, 3-in-1 drive ICs and ceramic
capacitors, 3-ounce copper, and 6 levels of PCBs guarantees less temperature,
greater effectiveness and rapider reaction.


BLHeli-S Firmware Ready

The ESC (with great performance and rich functions)
makes use of the first BLHeli-S firmware and supports adjusting
parameters or upgrading firmware via various techniques
(i.e. via throttle signal wire with using other development board
or a FC flashed due to the Cleanfight / Betaflight firmware).


DShot150/300/600 Ready

Besides the regular PWM mode,
Oneshot125/Oneshot42/Multishot modes, the most recent
DShot150/300/600 modes may supported. In
DShot150/300/600 modes, the ESC has great
anti-interference performance and fast response.


Hardware Generated PWM &
Damped Light Mode

The ESC firmware utilizes gear created motor pwm for smooth
throttle response and peaceful procedure. Damped light does regenerative
breaking, causing very quickly motor retardation, and it inherently additionally
does active freewheeling.



Specifications

  • Cont./Peak active : 20Ax4/ 30Ax4
  • Input Voltage : 2-4S Lipo
  • BEC output : No

Wires & Connectors

  • Input cables : Red-16AWG-85mm/ Black-16AWG-85mm
  • Output Wires : No cables but solder tabs
  • Input Connectors : No
  • Output Connectors : No
  • Firmware : BLHeli-S A-H-50 16.5
  • ESC Programming : BLHeliSuite
  • Stick Programming : Supported
  • DEO : Supported
  • Throttle number Calibration : Supported
  • Oneshot125 Mode : Supported
  • Oneshot42 Mode : Supported
  • MultiShot Mode : Supported
  • DShot150/300/600 : Supported
  • Timing : Supported
  • Motor Rotation : Supported

Size & Weight

  • Size : 32x31.9x5.8mm
  • Weight : 6g

Applications

  • 130-280mm FPVs

Copyright © 2008-2024 rcjaz.com.au All rights reserved


Merry Deals for Every Hobbyist!
Redeem [ XM03 ] for 3% OFF—no minimum required!
Use [ XM05 ] for 5% OFF on orders over $100!
Go big with [ XM10 ] for 10% OFF on orders over $200!
This Christmas, gift your hobby the savings it deserves!